Protect an exposed mounting point
The IP68 and IK10-rated enclosure suits an exterior entrance. Protect the cable connections and allow access for service.
Full HD PoE dome for busy exterior entrances
ACTi Z910 2MP Outdoor PoE Mini Dome Camera with IK10
Give a busy doorway or service area a wide Full HD view in a compact, IK10-rated dome. Use one Ethernet run for video and power with compatible PoE.
- One ACTi Z910 camera
- Fixed 2.8 mm lens · Ethernet · Built-in microphone
Compare PoE mini domes
- Z910 · 2 MP$264.00 USD
- Z911 · 4 MP$361.00 USD
- Z912 · 5 MP$408.00 USD
AT A GLANCE
Product Overview
The Z910 suits accessible exterior positions where the enclosure needs impact resistance. Its 108.6° fixed view covers the doorway and approach, while 120 dB wide dynamic range helps around backlit openings.
-
Full HD with a wide fixed view
Use 1080p coverage for a doorway, service area or passage with a defined approach.
-
Aim the camera at installation
The fixed 2.8 mm lens covers 108.6° horizontally. Set the camera position to frame the area you need.
-
Plan nighttime coverage
Infrared is rated up to 164 ft (50 m). Aim away from close reflective surfaces.
-
Match the wiring to the camera
Power the camera through an IEEE 802.3af PoE switch or injector, or use a suitable 12 V DC supply with Ethernet.
-
Protect the cable connections
Use a protected cable entry with the IP68-rated housing. The dome also has an IK10 impact rating.
-
Choose a compatible recording channel
Check the IP recorder’s supported stream, audio and event settings.
What’s included and what’s sold separately
Monitor a busy entrance with a compact outdoor dome
The ACTi Z910 is a wired 1080p mini dome with a fixed 2.8 mm lens, a 108.6° horizontal view and an IK10-rated enclosure. Choose it for an exterior doorway or service area where you want wide coverage in a compact, impact-resistant housing.
See the approach in mixed light and after dark
120 dB wide dynamic range helps preserve detail across sunny and shaded parts of the scene. Adaptive infrared illuminates up to 50 m (164 ft). Set the camera so nearby surfaces are clear of the infrared beam.
Choose the events you need to review
Use built-in people and vehicle detection, line crossing or intrusion detection to monitor an area you define. The integrated microphone provides one-way audio. Check which video, audio and event features your recorder or VMS supports before relying on them.
Plan a wired connection and recording
Connect over Ethernet using IEEE 802.3af PoE, or supply compatible 12 V DC power separately. Use a compatible recorder or VMS for local playback and choose its storage for your recording schedule.
What is included?
This offer is for one ACTi Z910 camera with its integrated 2.8 mm lens and microphone. Plan your Ethernet run, power source, recording equipment and any installation-specific mount separately.
Key specifications
- 1920 × 1080 at up to 30 fps.
- Fixed 2.8 mm F2.0 lens and 108.6° horizontal view.
- Adaptive IR illumination up to 50 m and 120 dB wide dynamic range.
- PoE IEEE 802.3af or 12 V DC. Rated PoE consumption 5 W.
- IP68 and IK10 housing. Camera body 4.3 in diameter × 3.3 in high.
Is this a zoom camera?
The Z910 uses a fixed 2.8 mm lens. Choose its mounting location and aim during setup to get the framing you need.
Who handles my warranty?
Your 2-Year ClearVero™ Product Warranty covers eligible defects in materials or workmanship during normal use. Email info@clearvero.com with your order number, model and serial number. ClearVero handles your claim and coordinates service.
How do I request a return?
Email info@clearvero.com within 30 days of delivery for return authorization. Keep the item complete and in resalable condition with its original packaging and accessories.
Who pays return shipping?
ClearVero covers approved return shipping for verified damaged, defective, incomplete or incorrect orders. For a change of mind, use tracked shipping at your expense.
Is shipping free, and when will my camera arrive?
Eligible U.S. orders ship free by standard shipping. Allow 1–3 business days for processing, then up to 7 business days for estimated delivery.
Recording add-ons
- ACTi YVR-120 hybrid DVR — sold separately.
- ACTi YVR-121 hybrid DVR — sold separately.
- WD Purple 4TB surveillance hard drive — sold separately. Fits the single SATA bay in either recorder.
Optional mounting accessories
ACTi PMAX-0712 junction box. Sold separately. Choose it when you need protected connection space at the mounting surface.
ACTi PMAX-0365 Wall Mount with Built-in Junction Box. Sold separately. Use the compatible wall-mount arrangement when the camera needs to face down from a vertical wall.
ACTi PMAX-0820 4-inch gang box adapter. Sold separately. Use it to fit the Z910 to a compatible 4-inch round or octagonal electrical box. Includes a 1-Year ClearVero™ Product Warranty.
WHY THIS CAMERA
Cover high-traffic areas with a compact dome
Plan a fixed view of the approach and keep the lower edge of the frame on the activity you need. The IK10-rated enclosure fits sites where impact resistance is a priority.
See a bright threshold and shaded approach
The 120 dB wide dynamic range helps balance strong backlight. Adaptive infrared is rated up to 164 ft (50 m) after dark.
Fit a long passage into the view
Use corridor mode to orient the image for a narrow passage where it helps. Confirm the orientation and playback on your recorder.
OUTDOOR APPLICATIONS
Where the Z910 fits
Use these examples to check the angle, cable route and recorder channel for your site.
ENTRANCES
Busy exterior doorway
Use the 108.6° view to cover the threshold and adjacent approach. Review a clip with the door open to check exposure and framing.
Installation concept illustration.
OUTDOOR WALLS
Service passage
Check corridor mode on a narrow route and aim away from close reflective surfaces. Confirm orientation and nighttime playback.
Installation concept illustration.
WIRED SYSTEMS
Existing conduit or box
Plan the Ethernet route before mounting. The PMAX-0820 fits a compatible 4-inch round or octagonal box and is sold separately.
Installation concept illustration.
POWER, NETWORK AND RECORDING
Connect and record the Z910
Power the camera through an IEEE 802.3af PoE switch or injector, or use a suitable 12 V DC supply with Ethernet. Reserve an IP channel on your recorder or VMS.
- Z910 camera Captures the fixed view and provides one-way audio through its built-in microphone.
- Ethernet and PoE Power the camera through an IEEE 802.3af PoE switch or injector, or use a suitable 12 V DC supply with Ethernet.
- Local recorder Reserve an IP channel. Verify your codec, resolution and any required audio or events.
- Playback and retention Play back a saved clip and set the recording schedule and retention on the installed drive.
Choose the recording mode before mounting
Use a compatible 1080p IP recorder or VMS. A recorder with ONVIF Profile G can access the Z910’s edge recordings. Choose recorder support for audio and events when you need those features.
Use the lighting mode for the site
IR illumination is rated up to 50 m (about 164 ft). Aim to limit reflections from nearby surfaces.
Capture audio and events with compatible equipment
Built-in people and vehicle detection, tamper detection, line crossing and intrusion detection. Verify support on the recorder before using the events.
Control where the camera points
Set the fixed 108.6° view at installation. Review light, motion and the areas you want to capture before securing the mount.
Reference DORI distances (detection, observation, recognition and identification) are 138 / 55 / 28 / 14 ft. Actual detail depends on lighting and placement.
INSTALLATION GUIDANCE
Plan a solid mounting point and a protected Ethernet exit
Choose the mounting surface and leave room for the cable bend. Check the view on the local network before you secure the dome.
-
Frame the area that matters
For direct mounting on a solid ceiling, plan the cable route through the ceiling or along its surface. A PMAX-0712 junction box can enclose the connections if there is no protected recess.
-
Connect camera power
IEEE 802.3af PoE or a suitable 12V DC supply. The rated camera draw is 5 W via PoE.
-
Protect the cable path
Protect the RJ45 pigtail and DC connection before exposing the mount to weather. Use a suitable weatherproof cable entry or junction box, and leave room for the cable bend.
-
Verify recording and playback
Test the exact video mode in live view and save a short clip. Check playback before closing the cable route. Test audio and events if they are part of your recording plan.
PUT IT TO WORK
Check the fit before you order
Choose the Z910 for a busy doorway or passage that needs a compact, impact-resistant camera. Reserve an IP channel and a compatible power source.
You already have a recording system
Reuse the recorder if you have an available compatible channel. Confirm the stream and playback before adding installation hardware.
You want a new local recorder
Count IP channels and total bitrate, then choose the drive capacity for your retention target. The recorder and drive are sold separately.
Choose the mount for the surface
Use the PMAX-0712 for protected connection space, the PMAX-0365 for the supported wall-mount setup, or the PMAX-0820 for a compatible 4-inch round or octagonal box. See the Add-ons section for the separately sold parts.
INSTALLATION DETAIL
Plan the space around your Z910
Camera body: 109 mm diameter × 83 mm high (4.3 × 3.3 in.). Allow extra clearance for the selected mount, connector and cable bends.
Frame the coverage your site needs
TECHNICAL SPECIFICATIONS
Z910 specifications in one place
Check the exact lens, video mode, power and mounting dimensions for your installation.
Image and lens
- Resolution
- 2 MP
- Lens
- Fixed 2.8 mm, F2.0
- Horizontal field of view
- 108.6°
- Vertical field of view
- 62.7°
- Image sensor
- 1/2.7-inch progressive-scan CMOS
- Manual aiming range
- Pan 3–360°, tilt 0–68°, rotation 0–360°
Day, night and image processing
- Wide dynamic range
- 120 dB
- Adaptive infrared
- 850 nm, up to 50 m (164 ft)
- Day/night
- Mechanical IR-cut filter
- Minimum illumination
- 0.001 lux in color at F2.0 with gain enabled; 0 lux with the camera illuminator on
- Image controls
- 2D and 3D noise reduction, defog, four privacy masks and text overlay
- Exposure and image detail
- 1 s to 1/100,000 s electronic shutter; 75 dB signal-to-noise ratio
Video, audio and events
- Video modes
- 1920 × 1080, 1280 × 720, 720 × 576 and 640 × 360 at up to 30 fps
- Video connection
- 10/100 Mbps Ethernet, RJ45 pigtail
- Codecs
- H.265 Adaptive Stream, H.264 Adaptive Stream, MJPEG
- Audio
- Built-in microphone for one-way audio; G.711
- Events and actions
- People, vehicles, tampering, object line crossing, intrusion and sound. Supports snapshots by email or FTP and saving to storage.
- Image orientation
- Flip, mirror and rotation for corridor views
Power and integration
- Power source
- IEEE 802.3af PoE or a suitable 12V DC supply
- Rated consumption
- 5 W via PoE
- Recorder input
- IP channel; verify codec, event and audio support on the recorder
- ONVIF and streams
- Profiles S, G and T; two simultaneous streams
- Network and access
- DHCP, RTSP and HTTPS/TLS 1.2; IP filtering and password-protected user levels
- Edge recording
- Profile G; ACTi lists integration with NVR 3 Corporate, NVR 3 Business, INR and GNR series
Housing and environment
- Outdoor rating and housing
- IP68 and IK10
- Body dimensions
- 109 mm diameter × 83 mm high (4.3 × 3.3 in.)
- Operating temperature
- −40 to 140°F (−40 to 60°C)
- Operating humidity
- 10–95% RH, non-condensing
- Surge protection
- 4 kV
- Approvals and weight
- FCC Class B, CE Class B, UL Listed · 357.5 g (0.79 lb)
THIS CAMERA OFFER
Your Z910 camera configuration
Your order includes the camera and the items listed here.
ACTi Z910 camera
One ACTi Z910 camera with integrated fixed 2.8 mm lens and built-in microphone.
COMPLETE YOUR SETUP
The equipment around your camera
Choose the separately sold parts for your cable route, mounting surface and recording plan.
Power and video connection
IEEE 802.3af PoE or a suitable 12V DC supply. Use suitable Ethernet cabling and protect the camera connection. Sold separately.
Recording and local playback
Choose a compatible IP recorder or VMS for system recording.
Recorder and drive sold separately.
PMAX-0712 junction box
Use this junction box when the connection needs enclosed space behind the dome. Sold separately.
PMAX-0365 wall mount with built-in junction box
Use this wall arm for the supported wall-mount setup with enclosed connection space. Sold separately.
PMAX-0820 gang box adapter
Use this adapter to attach the dome to a compatible 4-inch round or octagonal box. Sold separately.
BUYER FAQ
Z910 setup and purchase questions
Quick answers on fit, setup and buying from ClearVero.
What’s included with the Z910?
One ACTi Z910 camera with fixed 2.8 mm lens and built-in microphone. Ethernet cable, power equipment, recorder, storage and optional mounts are sold separately.
How do I set the camera’s view?
The 2.8 mm lens provides a fixed 108.6° horizontal view. Set the aim at installation.
How do I power the Z910?
Power the camera through an IEEE 802.3af PoE switch or injector, or use a suitable 12 V DC supply with Ethernet. Power equipment is sold separately.
Which recorder should I choose?
Use a compatible IP recorder or VMS that supports the 1080p stream. On a hybrid DVR, use an IP channel.
Which recorder supports edge playback?
Choose a recorder with ONVIF Profile G to access the Z910’s edge recordings.
Is a hard drive included with either recorder?
Each recorder takes a compatible SATA drive, sold separately.
How does the camera connect to a recorder?
Use Ethernet and a compatible IP channel. Power the camera with PoE or 12 V DC.
How do I find the Z910 on the network?
Use your network’s DHCP device list to find the camera’s address. Open it from the same network, then set credentials and check live view.
Can I record sound with video?
Yes. A compatible recorder can save one-way audio from the built-in microphone. Follow the privacy rules for your site.
Which mount fits my installation?
Choose the PMAX-0712 for connection space, PMAX-0365 for a wall or PMAX-0820 for a compatible 4-inch round or octagonal box. Add-ons sold separately.
How far does the night illumination reach?
Infrared is rated up to 164 ft (50 m).
How far away can I identify a person?
The reference identification distance is about 14 ft. Lighting and camera angle affect usable detail.
Can I install this camera outdoors?
Yes. The housing is IP68 rated. Protect the connectors and cable entry. The dome is also IK10 rated for impact resistance.
What does the camera warranty cover?
The 2-Year ClearVero™ Product Warranty covers eligible defects in materials or workmanship during normal use. ClearVero handles claims directly at info@clearvero.com.
Which optional items have a warranty?
The optional mounts shown here include a 1-Year ClearVero™ Product Warranty. ClearVero handles support for separately purchased equipment.
How do I request a return?
Email info@clearvero.com within 30 days of delivery for return authorization. Keep the item complete and in resalable condition with its original packaging and accessories.
Who pays return shipping?
ClearVero covers approved return shipping for verified damaged, defective, incomplete or incorrect orders. For a change of mind, use tracked shipping at your expense.
Is shipping free, and when will my camera arrive?
Eligible U.S. orders ship free by standard shipping. Allow 1–3 business days for processing, then up to 7 business days for estimated delivery.
Recording and storage
Choose the recorder that fits your cameras
For Z910, use a compatible IP channel. Supply PoE through a compatible switch or injector, or use Ethernet with a suitable 12V DC supply.
| Your setup | ACTi YVR-120 | ACTi YVR-121 |
|---|---|---|
| Hybrid mode | 4 analog + 2 IP | 8 analog + 4 IP |
| IP-only mode | Up to 6 IP | Up to 8 IP |
| Recording bandwidth | 16 Mbps total | 32 Mbps total |
| Local storage | One SATA bay, drive sold separately | One SATA bay, drive sold separately |
| Recorder only | $344.00 USD | $435.00 USD |
Check the recorder’s supported inputs, storage and playback before planning a new installation. A compatible system you already own may be enough.
Recording & storage
Camera only is the default. Choose one recorder, then add a drive if needed. Both recorders require separate camera power; no PoE ports.
ACTi YVR-120 recorder
$344.00 USDRecord camera video locally and review it on an HDMI or VGA monitor. Install a compatible SATA drive in the recorder. Use a compatible IP channel and power the camera separately with PoE or 12V DC.
Sold separately. Suggested quantity: one per installation.
Available
ACTi YVR-121 recorder
$435.00 USDRecord camera video locally and review it on an HDMI or VGA monitor. Install a compatible SATA drive in the recorder. Use a compatible IP channel and power the camera separately with PoE or 12V DC.
Sold separately. Suggested quantity: one per installation.
Available
WD Purple 4TB surveillance hard drive
$299.00 USDAdd 4TB of local storage to the YVR-120 or YVR-121. Install this 3.5-inch SATA drive in the recorder’s single drive bay before recording.
Sold separately. Suggested quantity: one per installation.
AvailableUse either Add to Cart button to add the camera and selected options.
INSTALLATION OPTIONS
Choose the mounting parts your site needs
Start with the mounting surface and cable exit. Each add-on is sold separately.
Mounting & power
Optional installation accessory
ACTi PMAX-0712 Sold separately.
$105.00 USD
Leave room for the camera connections where the mounting surface has no cable cavity.
Fits the ACTi Z910. Confirm the cable entry and suitable fasteners for your mounting surface.
When to choose this accessory
You need a junction space for the camera connections at a surface mount.
Already covered if: Your mounting surface already provides protected connection space.
Includes 1-Year ClearVero™ Product Warranty.
Available
Optional installation accessory
ACTi PMAX-0365 Sold separately.
$175.00 USD
Position the camera on a wall-mounted arm with room for cable connections.
Use one ACTi PMAX-0365 per compatible ACTi Z910 in the mounting setup described here. Confirm the cable entry and suitable fasteners for your surface.
When to choose this accessory
Use the compatible wall-mount arrangement when the camera needs to face down from a vertical wall.
Already covered if: Direct mounting already provides the view and a suitable cable path.
Includes a 1-Year ClearVero™ Product Warranty with this camera purchase.
Available
Optional installation accessory
ACTi PMAX-0820 Sold separately.
$100.00 USD
Mount the Z910 on an existing 4-inch round or octagonal box.
Use one ACTi PMAX-0820 per Z910 when mounting to a compatible 4-inch round or octagonal box. Check the box shape, screw pattern and cable route.
When to choose this accessory
The installation already has a compatible 4-inch round or octagonal box.
Already covered if: You are mounting the camera directly or using a different supported mount.
Includes a 1-Year ClearVero™ Product Warranty.
Available
READY FOR YOUR INSTALLATION?
Set up a durable entrance view
Choose the Z910 for a fixed Full HD view where impact resistance matters. Match the mount to the surface and add recording equipment for your site.
- One ACTi Z910 camera
- Fixed 2.8 mm lens · Ethernet
- Recording equipment and optional mounts sold separately
SKU Z910
$264 USD
Price shown is per camera. Selected add-ons are sold separately.
- ACTi Product Specialist
- 2-Year Product Warranty
- 30-Day Money-Back Guarantee