Upgrade a wall position to 5 MP
Use a sound BNC coax run and a DVR channel that records the chosen analog HD mode. Keep separate 12 V power at the camera.
5 MP coax upgrade for wall-mounted coverage
ACTi Y32 5MP Outdoor Analog Bullet Camera, 2.8mm
Upgrade a loading entrance or exterior approach to 5 MP over compatible BNC coax. The integrated wall bracket lets you aim the bullet along the approach.
- One ACTi Y32 camera
- Fixed 2.8 mm lens · BNC coax
Keep your coax cabling
BNC video and separate 12V DC power. See compatible YVRs and video modes.
AT A GLANCE
Product Overview
Use the Y32 when you want a wider, more detailed view on a wired coax site. Check that the DVR channel can record the selected 5 MP format before reusing the cable run.
-
5 MP over a compatible coax input
Choose an analog HD mode your DVR can record at the camera’s 5 MP output.
-
Aim the camera at installation
The fixed 2.8 mm lens covers 102.2° horizontally. Set the camera position to frame the area you need.
-
Plan nighttime coverage
Infrared is rated up to 98 ft (30 m). Aim away from close reflective surfaces.
-
Match the wiring to the camera
Run BNC coax to the DVR and use a separate 12 V DC adapter with a 2.1 × 5.5 mm plug at the camera.
-
Protect the cable connections
Use a protected cable entry with the IP68-rated housing.
-
Choose a compatible recording channel
Match the BNC input to the camera’s output format and resolution.
What’s included and what’s sold separately
Get more detail from an existing coaxial camera run
The ACTi Y32 is a 5 MP outdoor analog bullet camera with a fixed 2.8 mm lens and a 102.2° horizontal view. Choose it for a wide entrance or side yard when your recorder supports the camera’s output format and you want to use an existing BNC cable run.
Choose the output your DVR can record
The BNC connection supports TVI, AHD, CVI and CVBS. For 5 MP capture, verify the recorder’s supported resolution and frame rate for the selected mode. The camera outputs up to 20 fps at 2592 × 1944 in TVI or AHD, or 25 fps at 2880 × 1620 in CVI. CVBS uses standard definition.
Cover a wide approach after dark
The fixed lens frames a broad section of the approach. Infrared illuminates up to 30 m (98 ft), and 130 dB wide dynamic range helps when the camera looks from shade toward a bright driveway or door.
Plan the coax and power runs
Use a compatible BNC video cable and DVR input, plus separate 12 V DC power through a 2.1 × 5.5 mm jack. Confirm the power source and recorder mode before mounting, and protect the cable connections from weather.
What is included?
This offer is for one ACTi Y32 camera with its integrated 2.8 mm lens. The 12 V DC power adapter, coaxial cable and recorder are separate purchases.
Key specifications
- 5 MP analog video with BNC output.
- Fixed 2.8 mm F2.0 lens and 102.2° horizontal view.
- IR illumination up to 30 m. 130 dB wide dynamic range.
- 12 V DC power. Rated consumption 3.6 W.
- IP68 weatherproof camera housing.
Can I plug it into a PoE switch?
Connect the camera to a compatible DVR with BNC coax and supply 12 V DC power separately.
Who handles my warranty?
Your 2-Year ClearVero™ Product Warranty covers eligible defects in materials or workmanship during normal use. Email info@clearvero.com with your order number, model and serial number. ClearVero handles your claim and coordinates service.
How do I request a return?
Email info@clearvero.com within 30 days of delivery for return authorization. Keep the item complete and in resalable condition with its original packaging and accessories.
Who pays return shipping?
ClearVero covers approved return shipping for verified damaged, defective, incomplete or incorrect orders. For a change of mind, use tracked shipping at your expense.
Is shipping free, and when will my camera arrive?
Eligible U.S. orders ship free by standard shipping. Allow 1–3 business days for processing, then up to 7 business days for estimated delivery.
Recording add-ons
- ACTi YVR-120 hybrid DVR — sold separately.
- ACTi YVR-121 hybrid DVR — sold separately.
- WD Purple 4TB surveillance hard drive — sold separately. Fits the single SATA bay in either recorder.
Optional mounting accessories
ACTi PMAX-0724 Aluminum Junction Box. Sold separately. Use it on a straight wall when the Y32 or Y35 needs space for the cable connections.
ACTi PMAX-0538 pole mount. Sold separately. For a 2.64–5-inch vertical pole, use one PMAX-0538 with one separately sold PMAX-0724. Protect the connections outdoors.
WHY THIS CAMERA
Get more detail from a suitable coax run
At a loading entrance or a side yard, the 102.2° fixed view gives you room to include the approach and the threshold. Match the recorder mode first so that recorded footage retains the detail you need.
Balance bright yards and shaded doors
The 130 dB wide dynamic range helps balance an exterior approach with a shaded loading entrance.
Keep the approach in view after dark
Infrared is rated up to 98 ft (30 m). Aim so close walls and awnings stay clear of the beam.
OUTDOOR APPLICATIONS
Where the Y32 fits
Use these examples to check the angle, cable route and recorder channel for your site.
ENTRANCES
Loading entrance
Use the wall bracket to frame the lane and the point where people approach the loading door. Check both areas in playback before securing the angle.
Installation concept illustration.
OUTDOOR WALLS
Side yard or exterior wall
Aim along the wall with enough clearance to keep the siding out of the foreground and reduce nighttime reflection.
Installation concept illustration.
WIRED SYSTEMS
One channel on an existing DVR
Check the condition of the coax run, then confirm that the free channel accepts the exact 5 MP output. Test a saved clip before sealing the connections.
Installation concept illustration.
COAX, POWER AND RECORDING
Connect and record the Y32
Run BNC coax to the DVR and use a separate 12 V DC adapter with a 2.1 × 5.5 mm plug at the camera. Set the camera and DVR to a compatible video mode.
- Y32 camera Sends the selected analog video format over coax.
- BNC coax and 12 V power Run BNC coax to the DVR and use a separate 12 V DC adapter with a 2.1 × 5.5 mm plug at the camera.
- Local recorder Choose a BNC input that records your signal at the required resolution.
- Playback and retention Play back a saved clip and set the recording schedule and retention on the installed drive.
Choose the recording mode before mounting
For 5 MP over TVI or AHD, the YVR-120 supports up to 20 fps and the YVR-121 up to 12 fps. The YVR-121 supports CVI up to 1080p.
Use the lighting mode for the site
IR illumination is rated up to 30 m (about 98 ft). Aim to limit reflections from nearby surfaces.
Know the camera’s 5 MP outputs
TVI or AHD carries 2592 × 1944 at up to 20 fps. CVI carries 2880 × 1620 at up to 25 fps. Match the DVR’s exact accepted mode. CVBS provides standard definition for compatible older inputs.
Control where the camera points
Set the fixed 102.2° view at installation. Review light, motion and the areas you want to capture before securing the mount.
Reference DORI distances (detection, observation, recognition and identification) are 184 / 74 / 37 / 18 ft. Actual detail depends on lighting and placement.
INSTALLATION GUIDANCE
Mount the bullet on a wall and protect the BNC connection
Choose a solid wall location, aim along the approach and allow enough space for the BNC and 12 V connections.
-
Frame the area that matters
Attach the integrated bracket to a stable wall. Route the cable through the wall or along its surface. Confirm the view and cable entry before drilling.
-
Connect camera power
A suitable 12V DC adapter with a 2.1 × 5.5 mm plug. The rated camera draw is 3.6 W via 12V DC.
-
Protect the cable path
Use the optional PMAX-0724 if you need space to enclose the connections. Protect the BNC and separate DC plug outdoors. Test video and playback before closing the junction.
-
Verify recording and playback
Test the exact video mode in live view and save a short clip. Check playback before closing the cable route.
PUT IT TO WORK
Check the fit before you order
Choose the Y32 for a wall-mounted 5 MP coax upgrade. Check the free channel’s supported signal and resolution before ordering.
You already have a recording system
Reuse sound BNC coax if the free DVR channel supports the selected signal and resolution. Check the separate 12 V supply.
You want a new local recorder
Count compatible BNC channels in hybrid mode, then choose the drive capacity for your retention target. The recorder and drive are sold separately.
Choose the mount for the surface
Available mounting options include PMAX-0724 junction box. For a 2.64–5 in. vertical pole, use the PMAX-0538 with the PMAX-0724. See the Add-ons section for the separately sold parts.
INSTALLATION DETAIL
Plan the space around your Y32
Camera body: 142 × 63 × 65 mm (5.59 × 2.48 × 2.56 in.). Allow extra clearance for the selected mount, connector and cable bends.
Frame the coverage your site needs
TECHNICAL SPECIFICATIONS
Y32 specifications in one place
Check the exact lens, video mode, power and mounting dimensions for your installation.
Image and lens
- Resolution
- 5 MP
- Lens
- Fixed 2.8 mm, F2.0
- Horizontal field of view
- 102.2°
- Vertical field of view
- 53.9°
- Image sensor
- 1/2.7-inch progressive-scan CMOS
Day, night and image processing
- Wide dynamic range
- 130 dB
- IR illumination
- Up to 30 m
- Day/night
- Mechanical IR-cut filter
- Minimum illumination
- 0.02 lux in color at F2.0 with gain enabled; 0 lux with the camera illuminator on
- Image controls
- DNR; image flip; white balance
- Electronic shutter
- 1/30 to 1/50,000 s (NTSC); 1/25 to 1/50,000 s (PAL)
Analog video and recorder compatibility
- HD-over-coax modes
- TVI/AHD: 2592 × 1944 at 20 fps. CVI: 2880 × 1620 at 25 fps.
- Legacy analog output
- CVBS in NTSC or PAL
- Video connection
- One BNC connector for TVI, AHD, CVI or CVBS
Power and integration
- Power source
- A suitable 12V DC adapter with a 2.1 × 5.5 mm plug
- Rated consumption
- 3.6 W via 12V DC
- Recorder input
- Compatible analog BNC input
- Network interface
- No Ethernet or PoE port
Housing and environment
- Outdoor rating and housing
- IP68; plastic
- Body dimensions
- 142 × 63 × 65 mm (5.59 × 2.48 × 2.56 in.)
- Operating temperature
- −22 to 140°F (−30 to 60°C)
- Operating humidity
- Up to 90% RH, non-condensing
- Surge protection
- 4 kV
- Approvals and weight
- FCC Class B, CE Class B · 135 g (0.30 lb)
THIS CAMERA OFFER
Your Y32 camera configuration
Your order includes the camera and the items listed here.
ACTi Y32 camera
One ACTi Y32 camera with integrated fixed 2.8 mm lens.
COMPLETE YOUR SETUP
The equipment around your camera
Choose the separately sold parts for your cable route, mounting surface and recording plan.
Power and video connection
A suitable 12V DC adapter with a 2.1 × 5.5 mm plug. Use suitable BNC coax cabling and protect the camera connection. Sold separately.
Recording and local playback
Choose a compatible analog DVR for recording and playback.
Recorder and drive sold separately.
PMAX-0724 junction box
Use this junction box to protect the BNC and power connections at the wall bracket. Sold separately.
PMAX-0538 pole mount
For a 2.64–5 in. vertical pole, pair this mount with the PMAX-0724 junction box, also sold separately. Sold separately.
BUYER FAQ
Y32 setup and purchase questions
Quick answers on fit, setup and buying from ClearVero.
What’s included with the Y32?
One ACTi Y32 camera with fixed 2.8 mm lens. BNC cable, 12 V power supply, DVR, hard drive and optional mounts are sold separately.
How do I set the camera’s view?
The 2.8 mm lens provides a fixed 102.2° horizontal view. Set the aim at installation.
How do I power the Y32?
Use a separate 12 V DC power adapter with a 2.1 × 5.5 mm plug. The adapter is sold separately.
Which recorder should I choose?
For 5 MP over TVI or AHD, choose up to 20 fps with the YVR-120 or up to 12 fps with the YVR-121. Both are sold separately.
Is a hard drive included with either recorder?
Each recorder takes a compatible SATA drive, sold separately.
How does the camera connect to a recorder?
Run BNC coax to a compatible DVR input and supply 12 V DC separately.
What cable does the camera use?
Use BNC coax for video. Run separate 12 V DC power to the camera.
Which mount fits my installation?
Use the integrated bracket on a wall. Add the PMAX-0724 for connection space, or pair it with the PMAX-0538 for a 2.64–5 in. pole. Add-ons sold separately.
How far does the night illumination reach?
Infrared is rated up to 98 ft (30 m).
How far away can I identify a person?
The reference identification distance is about 18 ft. Lighting and camera angle affect usable detail.
Can I install this camera outdoors?
Yes. The housing is IP68 rated. Protect the connectors and cable entry.
What does the camera warranty cover?
The 2-Year ClearVero™ Product Warranty covers eligible defects in materials or workmanship during normal use. ClearVero handles claims directly at info@clearvero.com.
Which optional items have a warranty?
The optional mounts shown here include a 1-Year ClearVero™ Product Warranty. ClearVero handles support for separately purchased equipment.
How do I request a return?
Email info@clearvero.com within 30 days of delivery for return authorization. Keep the item complete and in resalable condition with its original packaging and accessories.
Who pays return shipping?
ClearVero covers approved return shipping for verified damaged, defective, incomplete or incorrect orders. For a change of mind, use tracked shipping at your expense.
Is shipping free, and when will my camera arrive?
Eligible U.S. orders ship free by standard shipping. Allow 1–3 business days for processing, then up to 7 business days for estimated delivery.
Recording and storage
Choose the recorder that fits your cameras
For Y32, use an analog BNC input in hybrid mode. Match the exact video signal and resolution the DVR accepts. Supply camera power separately.
| Your setup | ACTi YVR-120 | ACTi YVR-121 |
|---|---|---|
| Hybrid mode | 4 analog + 2 IP | 8 analog + 4 IP |
| IP-only mode | Up to 6 IP | Up to 8 IP |
| 5 MP analog recording | Up to 20 fps in TVI, AHD or CVI | Up to 12 fps in TVI or AHD. CVI is listed at up to 1080p. |
| Recording bandwidth | 16 Mbps total | 32 Mbps total |
| Local storage | One SATA bay, drive sold separately | One SATA bay, drive sold separately |
| Recorder only | $344.00 USD | $435.00 USD |
Check the recorder’s supported inputs, storage and playback before planning a new installation. A compatible system you already own may be enough.
Recording & storage
Camera only is the default. Choose one recorder, then add a drive if needed. Both recorders require separate camera power; no PoE ports.
ACTi YVR-120 recorder
$344.00 USDRecord camera video locally and review it on an HDMI or VGA monitor. Install a compatible SATA drive in the recorder. Connect the camera to an analog BNC input and supply 12V DC power separately.
Sold separately. Suggested quantity: one per installation.
Available
ACTi YVR-121 recorder
$435.00 USDRecord camera video locally and review it on an HDMI or VGA monitor. Install a compatible SATA drive in the recorder. Connect the camera to an analog BNC input and supply 12V DC power separately.
Sold separately. Suggested quantity: one per installation.
Available
WD Purple 4TB surveillance hard drive
$299.00 USDAdd 4TB of local storage to the YVR-120 or YVR-121. Install this 3.5-inch SATA drive in the recorder’s single drive bay before recording.
Sold separately. Suggested quantity: one per installation.
AvailableUse either Add to Cart button to add the camera and selected options.
INSTALLATION OPTIONS
Choose the mounting parts your site needs
Start with the mounting surface and cable exit. Each add-on is sold separately.
Mounting & power
Optional installation accessory
ACTi PMAX-0724 Sold separately.
$116.00 USD
House the camera connections behind its integrated bracket.
Use one ACTi PMAX-0724 per compatible ACTi Y32 in the mounting setup described here. Confirm the cable entry and suitable fasteners for your surface.
When to choose this accessory
Use it on a straight wall when the Y32 or Y35 needs space for the cable connections.
Already covered if: The wall already provides suitable protected cable space.
Includes a 1-Year ClearVero™ Product Warranty with this camera purchase.
Available
Optional installation accessory
ACTi PMAX-0538 Sold separately.
$111.00 USD
Secure the camera assembly to a compatible vertical pole.
For the ACTi Y32, use one PMAX-0538 with one PMAX-0724, sold separately. The pole must be 2.64–5 inches in diameter. Protect connections outdoors.
When to choose this accessory
A compatible pole is the selected mounting surface and you have or will order the PMAX-0724.
Already covered if: Your camera will be attached to a wall, a ceiling or a pole outside the supported diameter range.
Includes a 1-Year ClearVero™ Product Warranty.
Available
READY FOR YOUR INSTALLATION?
Upgrade the wall view over coax
Choose the Y32 for a wide 5 MP view from a wall. Match your DVR input and select a junction box or pole assembly only if the site calls for one.
- One ACTi Y32 camera
- Fixed 2.8 mm lens · BNC coax
- Recording equipment and optional mounts sold separately
SKU Y32
$268 USD
Price shown is per camera. Selected add-ons are sold separately.
- ACTi Product Specialist
- 2-Year Product Warranty
- 30-Day Money-Back Guarantee