Frame an entrance and its approach
The 100.7° fixed lens gives you a broad view from one turret. Set the aim at installation and check subject size in recorded footage.
5 MP PoE for commercial entrances after dark
ACTi Z512 5MP Outdoor PoE Turret Camera with ColorGuard
Cover a commercial entrance or service drive in 5 MP. Keep infrared for discreet night coverage, or configure the white light for color when the site can accommodate visible light.
- One ACTi Z512 camera
- Fixed 2.8 mm lens · Ethernet · Built-in microphone
AT A GLANCE
Product Overview
Plan a fixed view for a commercial site where light changes throughout the day. The 100.7° lens covers a broad approach, and built-in person and vehicle detection helps you focus your event review.
-
5 MP detail on a fixed view
Choose the stream that fits the detail and motion you need. The 5 MP mode delivers 2560 × 1920 at up to 20 fps.
-
Aim the camera at installation
The fixed 2.8 mm lens covers 100.7° horizontally. Set the camera position to frame the area you need.
-
Plan nighttime coverage
Infrared and configurable white light are each rated up to 164 ft (50 m).
-
Match the wiring to the camera
Power the camera through an IEEE 802.3af PoE switch or injector, or use a suitable 12 V DC supply with Ethernet.
-
Protect the cable connections
Use a protected cable entry with the IP68-rated housing.
-
Choose a compatible recording channel
Check the IP recorder’s supported stream, audio and event settings.
What’s included and what’s sold separately
See an entrance in detail, even after dark
The ACTi Z512 is a wired outdoor turret with a fixed 2.8 mm lens, a 100.7° horizontal view and 5 MP video. Use it for a doorway, parking approach or service area where you want a broad fixed view and control over how the scene is lit after dark.
Choose how to light the scene
Adaptive infrared provides black-and-white night video by default. Enable the configurable white light for color at night where visible lighting suits the site. Each light source is rated up to 50 m (164 ft). Mounting position, nearby surfaces and subject distance affect usable detail.
Focus motion events on people and vehicles
Built-in smart motion detection can flag people or vehicles. An integrated one-way microphone can add audio to a compatible recording system. Video, audio and event handling depend on the recorder and its settings.
Plan power, network and recording
Run one Ethernet cable to an IEEE 802.3af PoE switch or use Ethernet with a suitable 12 V DC supply. Set up recording on a compatible NVR or VMS. The camera supports ONVIF Profiles S and T and can send video to compatible NFS storage.
What is included?
This offer is for one ACTi Z512 camera with its integrated 2.8 mm lens and microphone. Plan your Ethernet run, power source, recording equipment and any installation-specific mount separately.
Key specifications
- 2560 × 1920 at up to 20 fps. 2560 × 1440 at up to 25 fps.
- Fixed 2.8 mm F1.6 lens and 100.7° horizontal view.
- 130 dB wide dynamic range for scenes with bright and shaded areas.
- H.265, H.264 and MJPEG video. Two simultaneous streams.
- IP68 housing. Protect exposed cable connections during installation.
- PoE consumption 3.9 W. Camera body 4.6 in diameter × 3.9 in high.
Can I change the framing after installation?
Set the view by aiming the turret when you install it. The fixed lens gives you a 100.7° horizontal view.
Who handles my warranty?
Your 2-Year ClearVero™ Product Warranty covers eligible defects in materials or workmanship during normal use. Email info@clearvero.com with your order number, model and serial number. ClearVero handles your claim and coordinates service.
How do I request a return?
Email info@clearvero.com within 30 days of delivery for return authorization. Keep the item complete and in resalable condition with its original packaging and accessories.
Who pays return shipping?
ClearVero covers approved return shipping for verified damaged, defective, incomplete or incorrect orders. For a change of mind, use tracked shipping at your expense.
Is shipping free, and when will my camera arrive?
Eligible U.S. orders ship free by standard shipping. Allow 1–3 business days for processing, then up to 7 business days for estimated delivery.
Recording add-ons
- ACTi YVR-120 hybrid DVR — sold separately.
- ACTi YVR-121 hybrid DVR — sold separately.
- WD Purple 4TB surveillance hard drive — sold separately. Fits the single SATA bay in either recorder.
A compatible microSDHC or microSDXC card for onboard recording is also sold separately.
Optional mounting accessories
ACTi PMAX-0365 Wall Mount with Built-in Junction Box. Sold separately. Use the compatible wall-mount arrangement when the camera needs to face down from a vertical wall.
ACTi PMAX-0128 Pendant Mount. Sold separately. Use it for the supported pendant setup when the camera needs to sit below the ceiling.
ACTi PMAX-0727 Junction Box. Sold separately. Use it with the supported hard-ceiling surface setup when connections need room.
ACTi PMAX-0538 pole mount. Sold separately. For a 2.64–5-inch vertical pole, use one PMAX-0538 with one separately sold PMAX-0365. Protect the connections outdoors.
WHY THIS CAMERA
Plan for the light your site actually has
Set the view around the activity you need to review. A wide frame captures more context. Aim the camera closer to the point of interest when detail there matters most.
Choose color or infrared at night
Adaptive infrared is the default. Configure the white light where color detail is useful and visible light suits the site. Each illuminator is rated up to 164 ft (50 m).
Review people and vehicles first
Use the built-in detection rules to focus on activity that matters. Confirm that your recorder or video software can receive the events you want to review.
OUTDOOR APPLICATIONS
Where the Z512 fits
Use these examples to check the angle, cable route and recorder channel for your site.
ENTRANCES
Commercial entrance
Aim to capture people approaching the door. Check the view with the door open and use the 130 dB wide dynamic range to help balance bright outdoor light and a shaded threshold.
Installation concept illustration.
OUTDOOR WALLS
Service drive
Check where vehicles pass through the fixed frame. Configure visible white light if you need color after dark and can keep it away from neighboring areas.
Installation concept illustration.
WIRED SYSTEMS
Additional camera on a wired site
Reserve an IP channel, an Ethernet run and a PoE port. Verify recording at your chosen resolution and frame rate before committing to the final location.
Installation concept illustration.
POWER, NETWORK AND RECORDING
Connect and record the Z512
Power the camera through an IEEE 802.3af PoE switch or injector, or use a suitable 12 V DC supply with Ethernet. Reserve an IP channel on your recorder or VMS.
- Z512 camera Captures the fixed view and provides one-way audio through its built-in microphone.
- Ethernet and PoE Power the camera through an IEEE 802.3af PoE switch or injector, or use a suitable 12 V DC supply with Ethernet.
- Local recorder Reserve an IP channel. Verify your codec, resolution and any required audio or events.
- Playback and retention Play back a saved clip and set the recording schedule and retention on the installed drive.
Choose the recording mode before mounting
Use an IP recorder or VMS that supports your selected 5 MP stream. Confirm codec, audio and event support. On a hybrid DVR, reserve an IP channel and power the camera separately.
For local or network storage, the camera supports optional microSD and NFS. The hardware guide lists up to 512 GB with Kingston or SanDisk cards. Confirm the limit for your camera’s hardware revision. Cards are sold separately.
Use the lighting mode for the site
Adaptive IR is the default. Enable the white light if you need visible illumination and the site can accommodate it. Both have a rated range of up to 50 m.
Capture audio and events with compatible equipment
Built-in people and vehicle detection and tamper detection. Verify recorder and firmware support before relying on these events.
Control where the camera points
Set the fixed 100.7° view at installation. Review light, motion and the areas you want to capture before securing the mount.
Reference DORI distances (detection, observation, recognition and identification) are 184 / 74 / 37 / 18 ft. Actual detail depends on lighting and placement.
INSTALLATION GUIDANCE
Set the aim and lighting before you seal the connections
Mark the ceiling position, confirm space for the cable, and check both day and night playback before finalizing the mount.
-
Frame the area that matters
Use the drilling template to mark a solid ceiling. For direct mounting, separate the base, fasten it with three appropriate screws, then align the arrows and rotate the turret until it locks. Aim it after securing the base.
-
Connect camera power
IEEE 802.3af PoE or a suitable 12V DC supply. The rated camera draw is 3.9 W via PoE.
-
Protect the cable path
Use outdoor-rated Ethernet cable and fit the included RJ45 weatherproof gland. Seal the 12 V connector separately, including when using PoE. Route the cable through the ceiling, through the notch in the base, or through the optional PMAX-0727 junction box.
-
Verify recording and playback
Test the exact video mode in live view and save a short clip. Check playback before closing the cable route. Test audio and events if they are part of your recording plan.
PUT IT TO WORK
Check the fit before you order
The Z512 is FCC Class A equipment intended for commercial environments. Plan for a wired IP system, then choose the light mode and event settings for the site.
You already have a recording system
Reuse the recorder if you have an available compatible channel. Confirm the stream and playback before adding installation hardware.
You want a new local recorder
Count IP channels and total bitrate, then choose the drive capacity for your retention target. The recorder and drive are sold separately.
Choose the mount for the surface
Available mounting options include PMAX-0365 wall mount with built-in junction box, PMAX-0128 pendant mount, PMAX-0727 junction box. For a 2.64–5 in. vertical pole, use the PMAX-0538 with the PMAX-0365. See the Add-ons section for the separately sold parts.
INSTALLATION DETAIL
Plan the space around your Z512
Camera body: 117.8 mm diameter × 100.3 mm high (4.6 × 3.9 in.). Allow extra clearance for the selected mount, connector and cable bends.
Frame the coverage your site needs
TECHNICAL SPECIFICATIONS
Z512 specifications in one place
Check the exact lens, video mode, power and mounting dimensions for your installation.
Image and lens
- Resolution
- 5 MP
- Lens
- Fixed 2.8 mm, F1.6
- Horizontal field of view
- 100.7°
- Vertical field of view
- 51.5°
- Image sensor
- 1/2.7-inch progressive-scan CMOS
- Manual aiming range
- Pan 0–360°, tilt 0–80°, rotation 0–360°
Day, night and image processing
- Wide dynamic range
- 130 dB
- Adaptive infrared
- 850 nm, up to 50 m (164 ft)
- Day/night
- Mechanical IR-cut filter
- Minimum illumination
- 0.001 lux in color at F1.6 with gain enabled; 0 lux with the camera illuminator on
- Image controls
- 2D and 3D noise reduction, defog, four privacy masks and text overlay
- Exposure and image detail
- 1 s to 1/100,000 s electronic shutter; 75 dB signal-to-noise ratio
Video, audio and events
- Video modes
- 2560 × 1920 at 20 fps; 2560 × 1440 at 25 fps; 2304 × 1296 at 30 fps
- Video connection
- 10/100 Mbps Ethernet, RJ45
- Codecs
- H.265 Adaptive Stream, H.264 Adaptive Stream, MJPEG
- Audio
- Built-in microphone for one-way audio; G.711
- Events
- People and vehicle smart motion, tampering and sound detection; recorder support varies
- Lower resolutions
- 1920 × 1080, 1280 × 720, 720 × 576, 640 × 360, 704 × 288 and 352 × 288 at up to 30 fps
Power and integration
- Power source
- IEEE 802.3af PoE or a suitable 12V DC supply
- Rated consumption
- 3.9 W via PoE
- Recorder input
- IP channel; verify codec, event and audio support on the recorder
- ONVIF and streams
- Profiles S and T; two simultaneous streams
- Network and access
- DHCP, RTSP and HTTPS/TLS 1.2; IP filtering and password-protected user levels
- Recording options
- Compatible IP recorder, NFS network storage or optional microSDHC/microSDXC card per the hardware manual
Housing and environment
- Outdoor rating and housing
- IP68; graphene plastic
- Body dimensions
- 117.8 mm diameter × 100.3 mm high (4.6 × 3.9 in.)
- Operating and startup temperatures
- Operates from −40 to 140°F (−40 to 60°C). Start up from −22 to 140°F (−30 to 60°C).
- Operating humidity
- Up to 95% RH, non-condensing
- Surge protection
- 4 kV
- Approvals and weight
- FCC Class A, CE Class A, UL Listed, BSMI · 260 g (0.57 lb, hardware manual)
THIS CAMERA OFFER
Your Z512 camera configuration
Your order includes the camera and the items listed here.
ACTi Z512 camera
One ACTi Z512 camera with integrated fixed 2.8 mm lens and built-in microphone.
Cable and mounting kits
The hardware manual lists a cable accessory kit with an RJ45 weatherproof gland, a screw kit and documentation.
COMPLETE YOUR SETUP
The equipment around your camera
Choose the separately sold parts for your cable route, mounting surface and recording plan.
Power and video connection
IEEE 802.3af PoE or a suitable 12V DC supply. Use suitable Ethernet cabling and protect the camera connection. Sold separately.
Recording and local playback
Choose a compatible IP recorder or VMS for system recording.
Recorder and drive sold separately.
PMAX-0365 wall mount with built-in junction box
Use this wall arm when you want the turret to sit off a vertical surface with enclosed connection space. Sold separately.
PMAX-0128 pendant mount
Use this pendant mount where a suspended mounting position fits the ceiling layout. Sold separately.
PMAX-0727 junction box
Use this junction box to enclose the cable connections at the mounting point. Sold separately.
PMAX-0538 pole mount
For a 2.64–5 in. vertical pole, pair this pole mount with the PMAX-0365 wall mount, also sold separately. Sold separately.
BUYER FAQ
Z512 setup and purchase questions
Quick answers on fit, setup and buying from ClearVero.
What’s included with the Z512?
One ACTi Z512 camera with fixed 2.8 mm lens and built-in microphone. Includes the cable accessory kit with RJ45 gland, screw kit and documentation. Ethernet cable, power equipment, recorder, storage and optional mounts are sold separately.
How do I set the camera’s view?
The 2.8 mm lens provides a fixed 100.7° horizontal view. Set the aim at installation.
How do I power the Z512?
Power the camera through an IEEE 802.3af PoE switch or injector, or use a suitable 12 V DC supply with Ethernet. Power equipment is sold separately.
Which recorder should I choose?
Use a compatible IP recorder or VMS that supports the 5 MP stream. On a hybrid DVR, use an IP channel.
Is a hard drive included with either recorder?
Each recorder takes a compatible SATA drive, sold separately.
Can the Z512 record to a memory card?
Yes. Add a compatible microSDHC or microSDXC card, sold separately, for onboard recording.
How does the camera connect to a recorder?
Use Ethernet and a compatible IP channel. Power the camera with PoE or 12 V DC.
Can I record sound with video?
Yes. A compatible recorder can save one-way audio from the built-in microphone. Follow the privacy rules for your site.
Which mount fits my installation?
Use the PMAX-0727 for connections, PMAX-0365 for a wall or PMAX-0128 for a pendant. Pair the PMAX-0538 with the PMAX-0365 for a 2.64–5 in. pole. Add-ons sold separately.
How far does the night illumination reach?
Infrared and configurable white light are each rated up to 164 ft (50 m).
How far away can I identify a person?
The reference identification distance is about 18 ft. Lighting and camera angle affect usable detail.
Can I install this camera outdoors?
Yes. The housing is IP68 rated. Protect both connectors. The Z512 is FCC Class A equipment for commercial environments.
Can the Z512 start in extreme cold?
The rated cold-start limit is −22°F (−30°C). Once running, the rated lower operating limit is −40°F (−40°C).
What does the camera warranty cover?
The 2-Year ClearVero™ Product Warranty covers eligible defects in materials or workmanship during normal use. ClearVero handles claims directly at info@clearvero.com.
Which optional items have a warranty?
The optional mounts shown here include a 1-Year ClearVero™ Product Warranty. ClearVero handles support for separately purchased equipment.
How do I request a return?
Email info@clearvero.com within 30 days of delivery for return authorization. Keep the item complete and in resalable condition with its original packaging and accessories.
Who pays return shipping?
ClearVero covers approved return shipping for verified damaged, defective, incomplete or incorrect orders. For a change of mind, use tracked shipping at your expense.
Is shipping free, and when will my camera arrive?
Eligible U.S. orders ship free by standard shipping. Allow 1–3 business days for processing, then up to 7 business days for estimated delivery.
Recording and storage
Choose the recorder that fits your cameras
For Z512, use a compatible IP channel. Supply PoE through a compatible switch or injector, or use Ethernet with a suitable 12V DC supply.
| Your setup | ACTi YVR-120 | ACTi YVR-121 |
|---|---|---|
| Hybrid mode | 4 analog + 2 IP | 8 analog + 4 IP |
| IP-only mode | Up to 6 IP | Up to 8 IP |
| Recording bandwidth | 16 Mbps total | 32 Mbps total |
| Local storage | One SATA bay, drive sold separately | One SATA bay, drive sold separately |
| Recorder only | $344.00 USD | $435.00 USD |
Check the recorder’s supported inputs, storage and playback before planning a new installation. A compatible system you already own may be enough.
Recording & storage
Camera only is the default. Choose one recorder, then add a drive if needed. Both recorders require separate camera power; no PoE ports.
ACTi YVR-120 recorder
$344.00 USDRecord camera video locally and review it on an HDMI or VGA monitor. Install a compatible SATA drive in the recorder. Use a compatible IP channel and power the camera separately with PoE or 12V DC.
Sold separately. Suggested quantity: one per installation.
Available
ACTi YVR-121 recorder
$435.00 USDRecord camera video locally and review it on an HDMI or VGA monitor. Install a compatible SATA drive in the recorder. Use a compatible IP channel and power the camera separately with PoE or 12V DC.
Sold separately. Suggested quantity: one per installation.
Available
WD Purple 4TB surveillance hard drive
$299.00 USDAdd 4TB of local storage to the YVR-120 or YVR-121. Install this 3.5-inch SATA drive in the recorder’s single drive bay before recording.
Sold separately. Suggested quantity: one per installation.
AvailableUse either Add to Cart button to add the camera and selected options.
INSTALLATION OPTIONS
Choose the mounting parts your site needs
Start with the mounting surface and cable exit. Each add-on is sold separately.
Mounting & power
Optional installation accessory
ACTi PMAX-0365 Sold separately.
$175.00 USD
Position the camera on a wall-mounted arm with room for cable connections.
Use one ACTi PMAX-0365 per compatible ACTi Z512 in the mounting setup described here. Confirm the cable entry and suitable fasteners for your surface.
When to choose this accessory
Use the compatible wall-mount arrangement when the camera needs to face down from a vertical wall.
Already covered if: Direct mounting already provides the view and a suitable cable path.
Includes a 1-Year ClearVero™ Product Warranty with this camera purchase.
Available
Optional installation accessory
ACTi PMAX-0128 Sold separately.
$103.00 USD
Suspend the turret below a solid ceiling with the matching pendant mount.
Use one ACTi PMAX-0128 per compatible ACTi Z512 in the mounting setup described here. Confirm the cable entry and suitable fasteners for your surface.
When to choose this accessory
Use it for the supported pendant setup when the camera needs to sit below the ceiling.
Already covered if: Surface mounting provides the required position.
Includes a 1-Year ClearVero™ Product Warranty with this camera purchase.
Available
Optional installation accessory
ACTi PMAX-0727 Sold separately.
$103.00 USD
Provide a separate cable junction space behind a surface-mounted turret.
Use one ACTi PMAX-0727 per compatible ACTi Z512 in the mounting setup described here. Confirm the cable entry and suitable fasteners for your surface.
When to choose this accessory
Use it with the supported hard-ceiling surface setup when connections need room.
Already covered if: The mounting surface already provides protected cable space.
Includes a 1-Year ClearVero™ Product Warranty with this camera purchase.
Available
Optional installation accessory
ACTi PMAX-0538 Sold separately.
$111.00 USD
Secure the camera assembly to a compatible vertical pole.
For the ACTi Z512, use one PMAX-0538 with one PMAX-0365, sold separately. The pole must be 2.64–5 inches in diameter. Protect connections outdoors.
When to choose this accessory
A compatible pole is the selected mounting surface and you have or will order the PMAX-0365.
Already covered if: Your camera will be attached to a wall, a ceiling or a pole outside the supported diameter range.
Includes a 1-Year ClearVero™ Product Warranty.
Available
READY FOR YOUR INSTALLATION?
Equip the entrance for day and night
Choose the Z512 for a fixed 5 MP view with configurable night lighting. Add the mount and recording equipment your commercial site needs.
- One ACTi Z512 camera
- Fixed 2.8 mm lens · Ethernet
- Recording equipment and optional mounts sold separately
SKU Z512
$448 USD
Price shown is per camera. Selected add-ons are sold separately.
- ACTi Product Specialist
- 2-Year Product Warranty
- 30-Day Money-Back Guarantee