White ACTi Z911
4MP fixed mini dome, integrated 2.8mm F2.0 lens and built-in one-way microphone.
WIRED OUTDOOR SECURITY
ACTi Z911 4MP Outdoor PoE Mini Dome Camera
Keep an entrance or walkway in view with a compact wired mini dome. Choose the fixed lens around your subject distance, then plan power, recording and mounting for the site.
- One white Z911 · 4MP · Fixed 2.8mm F2.0 lens
- IEEE 802.3af PoE or DC 12V · Plan compatible recording
AT A GLANCE
Product Overview
Choose the Z911 when a wide fixed view suits the entrance and Ethernet wiring is practical. Position it close enough for the detail you need; the lens cannot optically zoom in or follow a moving subject.
-
Review entrance activity
4MP video at up to 25 fps helps you review a planned view. Choose a lower supported resolution for up to 30 fps.
-
Frame a fixed approach
The 2.8mm lens covers 99° horizontally. Check usable detail at the subject distance before mounting.
-
Plan the night view
Adaptive infrared illuminates up to 50m in black and white. Illumination reach is not identification distance.
-
Define useful event areas
People, vehicle, line-crossing, intrusion and tamper functions help focus monitoring. Verify recorder event support.
-
Run one cable to the camera
A compatible IEEE 802.3af PoE source supplies power and network data over Ethernet.
-
Prepare an outdoor location
IP68 and IK10 ratings support outdoor planning. Protect connectors and stay within the operating limits.
Choosing the camera and optional equipment
Choose a fixed view for a wired entrance
The ACTi Z911 is a white 4MP outdoor mini dome camera with a fixed 2.8mm F2.0 lens and a 99° horizontal view. Choose it for an entrance, walkway or fixed approach where Ethernet wiring is practical. Place it close enough for the faces or objects you need to review; the lens does not optically zoom or track movement.
120dB WDR helps balance bright and shaded areas. Adaptive infrared supports black-and-white monitoring in darkness. The maximum 50m infrared range describes illumination, not guaranteed identification detail. Use the dimensions and viewing-distance guide to plan the position.
Keep compatible equipment; add what is missing
This offer is for one camera. Plan IEEE 802.3af PoE or 12V DC power, Ethernet cabling, a compatible recorder or VMS, and suitable storage. Verify the exact recorder model, firmware, resolution, codec, microphone recording, event integration and any licenses. Review recording requirements.
- ACTi YVR-120 — sold separately. Optional local recorder with an empty SATA bay; no hard drive or camera PoE ports. One per installation by default.
- WD Purple WD43PURZ 4TB — sold separately. Optional storage installed in the recorder, not in the camera.
- ACTi PMAX-0365 — sold separately. Optional straight-wall arrangement with the camera facing down and an integrated cable junction area.
- PLANET PoE injector, ACTi reference PPOE-0107 — sold separately. Indoor camera power when a compatible powered PoE port is unavailable.
Keep equipment that already meets your needs. Choose mounting parts for the exact surface; do not combine unrelated mounting arrangements. Cabling and installation are separate. Review the mounting plan and choose optional additions.
See the complete specifications, review the two-year ACTi limited warranty and ClearVero return conditions, or send ClearVero your setup questions before ordering.
THIS CAMERA OFFER
Know what you’re buying
One camera is the starting point. Build the rest of the installation around the equipment and wiring at your site.
Power, recording and mounting
Provide compatible PoE or 12V DC power, Ethernet cabling, a recorder or VMS, storage and any required licenses. Choose optional mounting parts for your surface. Installation is separate.
Choose optional recording, mounting and power →CLEARER PLACEMENT DECISIONS
What do you need to see at this entrance?
Start with the activity and distance, then choose the mounting position. A wide view takes in more of the approach, while a farther-away face or small object occupies less of the image.
Frame the entrance
A 99° horizontal view covers a fixed approach without a motorized pan-and-tilt mechanism. Place the camera near enough for the faces or objects you need to review.
Handle daylight and darkness
120dB WDR helps balance bright and shaded parts of a scene. In darkness, adaptive infrared supports black-and-white monitoring up to 50m; identification distance is much shorter and scene dependent.
Plan useful event rules
People and vehicle detection, line crossing, intrusion and tampering functions help focus monitoring. Configure the scene and check which events your exact recorder or VMS supports.
WHERE THIS CAMERA FITS
Plan around the approach
Choose the mounting position for the scene. Distance, lighting, mounting height and obstructions determine the detail you can review.
RESIDENTIAL
Home entrances
Place a camera over the approach to an entrance, with a protected cable route and a clear view. Check the actual daytime and nighttime image before securing the housing.
Installation concept illustration; not camera footage.
COMMERCIAL
Business approaches
Cover a storefront entrance or exterior walkway with a fixed observation point. Choose the distance for the level of detail your site needs.
Installation concept illustration; not camera footage.
WIRED SYSTEMS
Add a view to your wired site
Connect a camera at an entrance or exterior approach using an available, compatible recording channel. Plan Ethernet routing and a suitable PoE source for the new position.
Installation concept illustration; not camera footage.
POWER, NETWORK & RECORDING
Connect the camera to the recording setup you need
Connect the camera to an IEEE 802.3af PoE source on your wired network. Choose a compatible recorder or VMS, storage and licenses for the recording schedule you need. This offer is for the camera.
- Fixed mini dome Capture 4MP video and one-way microphone audio.
- Ethernet connection An IEEE 802.3af source supplies camera power and data.
- Your network Provide the planned wired network connection.
- Compatible recording Choose a recorder or VMS with appropriate storage and licenses.
Choose the power source
Use IEEE 802.3af PoE or DC 12V. Specified PoE consumption is 4W; check the port budget for the complete installation.
Match video settings
Simultaneous dual streams, H.265 Adaptive Stream, H.264 and MJPEG let you match video settings to the network and recording plan.
Retain useful audio context
The built-in microphone provides one-way G.711 audio. Confirm that the recorder supports microphone recording and playback, and configure audio for the privacy requirements at your site.
Set privacy and access controls
Four privacy-mask regions can obscure selected parts of the scene. Use password-protected user levels, HTTPS encryption and IP address filtering as appropriate for the installation.
INSTALLATION
Check the view, mounting, power and recording
A well-planned wired installation starts with the scene and finishes with a protected network connection.
-
SITE
Frame the activity
Choose a position that frames the entrance or approach. Test day and night views before completing the installation.
-
POWER
Provide compatible power
Check the PoE port budget and IEEE 802.3af compatibility, or plan a suitable DC 12V supply.
-
MOUNT
Match the mounting accessories
For a straight wall with the camera facing down, use one PMAX-0365 wall mount with its built-in junction box. For a 2.64–5-inch vertical pole, the qualified Z911 assembly uses PMAX-0349 plus PMAX-0527, not the Z53 pole assembly. Pole parts are separate and are not included in the options below. Protect outdoor cable connections.
-
RECORDER
Confirm recording support
Check the recorder or VMS version, licenses, storage, microphone support, and the events you intend to use.
BUYING GUIDANCE
Choose this camera for a planned fixed view
A wired camera is a practical choice when you can provide Ethernet and a compatible recording path.
Entrances and fixed approaches
Suitable when a wide fixed view matches the scene and Ethernet wiring is available.
Outdoor placement
IP68 and IK10 support outdoor placement within the specified −40°F to 140°F operating range. Optional project corrosion treatment is separate from this standard offer.
Choose another format for remote pan or zoom
The fixed 2.8mm lens does not provide motorized pan, tilt or optical zoom. Plan a closer camera position when identification detail matters.
INSTALLATION DETAIL
Plan the fit and the fixed view
Check the body size, mounting clearance and viewing distance before you choose the final camera position.
A compact 109 × 83 mm body
A fixed 99° horizontal view
SPECIFICATIONS
The details for your installation plan
These values apply to the standard white Z911 with its fixed 2.8mm F2.0 lens. Match the view, power, recording and installation requirements to your site.
Imaging and lens
- Sensor
- 4MP progressive-scan CMOS, 1/2.7-inch
- Lens
- Fixed 2.8mm F2.0
- Field of view
- 99° horizontal × 53.8° vertical
- Full resolution
- Up to 25 fps at 2688 × 1520
- Lower-resolution video
- Up to 30 fps at 2304 × 1296 or 1920 × 1080
- Camera view
- Fixed lens; no motorized optical zoom or PTZ
Day, night and image controls
- Infrared
- Adaptive 850nm IR; illumination up to 50m
- Day/night
- Mechanical IR-cut filter
- WDR
- 120dB
- Color sensitivity
- 0.001 lux at F2.0, AGC on
- Black-and-white sensitivity
- 0 lux with IR on
- Noise reduction
- 2D and 3D DNR
Video, events, and audio
- Compression
- H.265 Adaptive Stream, H.264, MJPEG
- Streams
- Simultaneous dual streams
- Detection
- People and vehicles
- Scene events
- Object line crossing and intrusion
- Additional event
- Motion and tampering detection
- Microphone
- Built in; one-way G.711 audio
Power and network
- PoE
- IEEE 802.3af
- Alternate power
- DC 12V
- Specified PoE consumption
- 4W
- Ethernet
- One 10/100 RJ45 Ethernet pigtail
- ONVIF profiles
- S, G, T
- Recording
- Compatible recorder/VMS; exact integration applies
Housing and environment
- Weather and impact
- IP68; IK10
- Temperature
- −40°F to 140°F (−40°C to 60°C)
- Humidity
- 10–95% RH, non-condensing
- Body dimensions
- 4.3 in diameter × 3.3 in high (109 × 83 mm)
- Camera weight
- 0.79 lb (360g)
- Color
- White
Protection and integration
- Privacy masks
- Four regions
- Motion detection
- Four regions
- Access controls
- IP filtering, HTTPS encryption and password-protected user levels
- Surge protection
- 4kV
- Approvals
- CE Class B, FCC Class B, UL Listed
- Edge recording
- NVR 3 Corporate / NVR 3 Business / INR / GNR; supported configurations
CAMERA OFFER
What you are buying
One standard ACTi Z911 camera. Recording, power equipment, mounting accessories, and installation are planned separately around your site.
ACTi Z911 camera
One white outdoor fixed mini dome with a 2.8mm F2.0 lens and built-in one-way microphone.
INSTALLATION PLANNING
Select additions when your setup needs them
Use only the compatible equipment required by the mounting, power, and recording plan. Optional additions are sold separately.
Recording and storage
Plan a compatible recorder or VMS, appropriate channel licenses and the storage required for your schedule and retention period. This camera offer is not a recorder-and-drive kit.
Power and cabling
Provide a compatible PoE source or DC supply and the Ethernet installation required by your site.
Mounting setup
Select the exact compatible bracket or adapter combination when direct mounting does not suit the location.
WARRANTY AND RETURNS
Know the coverage and the claim process
The standard camera has a two-year ACTi limited hardware warranty for eligible purchases. ClearVero return requests have a separate 30-calendar-day window from delivery, subject to authorization and product-condition requirements.
Eligibility, start dates, exclusions and service fees
Coverage and start date. The manufacturer warranty covers materials and workmanship defects under normal use for an eligible original purchase through authorized distribution. Keep proof of purchase. Registered products use ACTi’s shipping-invoice date; unregistered products use the authorized distributor’s purchase date shown by its shipping invoice. Custom products may follow separate contract terms. No purchased extension or extra ClearVero warranty is included.
Remedy and exclusions. ACTi decides eligibility and may repair with new or refurbished parts or replace the unit. Coverage after repair or replacement lasts for the original remainder or 90 days, whichever is longer. Exclusions include misuse, neglect, accident, tampering, unauthorized modification or repair, disasters, power disturbances, operation outside design limits, altered serial numbers, cosmetic damage and shipping damage. Manufacturer remedy and liability limits apply; installation labor is separate.
Fees and shipping. The examination fee is $80 per device and is waived when a covered defect is confirmed. Incorrect or incomplete claim information may incur a processing fee. Shipment to the service facility is your responsibility unless an approved arrangement applies; ACTi normally covers ground shipping back after repair or replacement. Separate accessories have their own coverage: the optional ACTi wall mount has a one-year limited warranty, and the drive offer has no confirmed manufacturer coverage or added ClearVero warranty.
Start a claim. Contact ClearVero with your order, camera serial number and a description of the issue. Manufacturer defect notice must be received within coverage. Wait for the return authorization and shipping instructions; an RMA device must arrive within 30 days of the RMA email. Early failures reported within 30 days of purchase with proof of purchase may follow the separate DOA process. ClearVero can help with reporting; manufacturer approval determines the warranty remedy.
ClearVero returns. Request authorization within 30 calendar days of delivery. Ordinary returns must be complete and resalable; installation, alteration and product condition can affect eligibility. Ordinary return shipping is paid by the customer. A conditional 15% restocking fee may apply under the return policy. Verified defects, shipping damage and fulfillment errors do not incur that fee; reasonable approved return shipping is covered when required.
BUYER FAQ
Answers before you install
Find the answers on the camera, recording, mounting, warranties, delivery and eligible returns before purchase.
Does it use Wi-Fi?
The Z911 uses a wired 10/100 Ethernet connection. Plan a protected Ethernet route to the camera; it is not a battery or Wi-Fi camera.
How do I power it?
Use IEEE 802.3af PoE or DC 12V. Specified PoE consumption is 4W. A compatible PoE switch or powered NVR port may already supply power. Otherwise, the optional PLANET injector, supplied under ACTi reference PPOE-0107, adds IEEE 802.3af/at power to an Ethernet connection. Keep the injector indoors at 0–50°C. Compare the optional additions.
What should I plan for recording?
Use a compatible recorder or VMS you already own, or choose the optional ACTi YVR-120. The YVR-120 ships without a hard drive and has no PoE camera ports. Add suitable SATA storage and separate camera power. Configure a supported network stream within its 16 Mbps recording budget; exact audio and event support depends on firmware and configuration. This camera offer is not a recorder-and-storage kit.
How wide is the view?
The fixed 2.8mm F2.0 lens provides a 99° horizontal and 53.8° vertical view. It does not provide motorized optical zoom. Distance and placement determine the detail available.
Does 50m infrared mean I can identify someone at 50m?
No. Up to 50m describes infrared illumination reach. Published DORI planning distances are 63m detection, 25.2m observation, 12.6m recognition and 6.3m identification. Actual results depend on the scene, light, angle and required detail.
Does it support two-way talk?
The built-in microphone supports one-way G.711 audio. The camera does not provide a built-in two-way conversation system. Confirm microphone recording and playback support in the exact recorder or VMS.
Which detection functions are built in?
People and vehicle detection, tampering, object-based motion, line crossing and intrusion detection are available. Configure the rules for the scene and verify the event integration with your recorder. Detection is not a guarantee that every event will be captured.
Can it record 4MP at 30 fps?
Maximum 4MP video is 25 fps at 2688 × 1520. Up to 30 fps is supported at lower resolutions, including 2304 × 1296 and 1920 × 1080.
Can I use it outdoors or near the coast?
The standard housing is rated IP68 and IK10, with a −40°F to 140°F operating range. Protect the connectors and cable route. Extra corrosion protection is a separate project option; do not assume the standard camera includes that treatment.
What warranty applies?
The standard Z911 has a two-year ACTi limited manufacturer warranty for eligible purchases. Proof of purchase, start-date rules, exclusions and service fees apply. Read eligibility, fees and claim steps. ClearVero returns are separate, and no installation service or extra ClearVero warranty is included.
Which mounting accessory should I choose?
For a straight wall with the camera facing down, choose one PMAX-0365 wall mount with its built-in junction box. It is optional and sold separately; use direct mounting when it suits the surface and cable route.
A 2.64–5-inch vertical pole uses the qualified Z911 combination PMAX-0349 plus PMAX-0527. Those parts are separate from the four options below. Do not copy the Z53 pole arrangement. Review the mounting plan, or ask ClearVero about your surface and cable route.
What is included in this camera offer?
One white Z911 camera with its fixed 2.8mm lens and built-in microphone. Provide compatible power, Ethernet cabling, recording equipment, storage and any mounting accessories separately. Review the camera offer and setup requirements.
Which warranty covers the optional wall mount?
The camera’s two-year warranty does not automatically extend to separate accessories. The optional ACTi PMAX-0365 has its own one-year limited manufacturer warranty, subject to its conditions. Review the mount and its coverage.
How do I request a return?
Request an eligible return within 30 calendar days of delivery. Contact ClearVero with your order number, checkout email and reason, and obtain authorization before shipping anything back. Return condition and inspection requirements apply. Read the return policy.
Who pays return shipping and restocking fees?
You pay shipping for ordinary non-defective returns. A conditional 15% restocking fee can apply to an eligible opened or tested item, altered packaging or additional resale preparation. Verified defective, damaged, incorrect or fulfillment-incomplete items have no restocking fee; ClearVero covers reasonable approved return shipping when required. Review eligibility and exclusions.
What are the U.S. shipping cost and estimated timing?
Eligible U.S. orders include free standard shipping. Orders normally process in 1–3 business days; U.S. delivery is estimated within seven business days after processing. These are separate periods and estimated dates. Availability checks, carriers and other delays can affect timing. Read the shipping policy.
Where does the optional WD Purple 4TB drive go?
Install one WD43PURZ in the YVR-120’s single SATA bay, not inside the Z911. The recorder, drive and installation are separate. Use the drive only with a compatible recorder and do not add it when suitable storage is already installed. Retention depends on bitrate and recording settings. Manufacturer warranty is not confirmed for this existing drive offer; no additional ClearVero warranty is included. Review the drive offer.
Where can I review the specifications and installation plan?
Use the Z911 specifications for the image, lens, power and operating limits. Check the body dimensions and viewing-distance guide, then review the mounting and power plan and recording requirements.
These resources help prepare your purchase. The diagrams are not drilling templates and do not replace the supplied installation and safety instructions. Send ClearVero your setup questions if a requirement is unclear.
RECORDING, MOUNTING AND POWER
Choose the additions your installation needs
Add a YVR-120 recorder and a compatible drive if you need local recording. Choose the wall mount and PoE injector only when your site needs them. Every item is optional, sold separately and unselected by default.
Optional installation addition
ACTi PMAX-0365 Wall Mount with Built-in Junction Box
$175.00 USD
Position the Z911 below a wall-mounted arm with an integrated cable junction area.
Useful when: You need the supported straight-wall arrangement with the camera facing down.
Not needed when: Direct mounting already provides the required view and a suitable cable path.
Compatibility: Use one PMAX-0365 per Z911 for the supported straight-wall arrangement. This is not the Z911 pole-mount solution; pole installations require a different qualified assembly.
Sold separately. ACTi Limited Manufacturer Warranty; terms apply
Available
Optional recording addition
ACTi YVR-120 6-Channel Hybrid DVR — No HDD
$344.00 USD
Add local video recording with an ACTi YVR-120. A compatible SATA hard drive is required and sold separately.
Useful when: You need a local recorder and have an available network connection, camera power and a compatible drive.
Not needed when: Your existing compatible recorder or VMS already covers this camera.
Compatibility: Use the Z911 as an IP camera over the network. Configure a supported ONVIF Profile S / H.264 stream within the recorder’s 16 Mbps total recording budget. The DVR has no PoE camera ports. Audio, camera analytics and events depend on firmware and configuration.
Sold separately. Two-year ACTi limited manufacturer warranty for eligible purchases; conditions apply.
Available
Optional recording addition
WD Purple WD43PURZ 4TB Surveillance Hard Drive
$299.00 USD
Add 4TB of internal recording storage to the YVR-120’s single SATA bay. Installation is required.
Useful when: You are adding the YVR-120, or already own a compatible recorder with an empty 3.5-inch SATA drive bay.
Not needed when: Your recorder already has suitable storage, or you do not need local disk recording.
Compatibility: One WD Purple WD43PURZ drive fits the YVR-120. Install it inside the recorder, not inside the Z911. A drive alone cannot record camera video. Capacity does not guarantee a fixed retention period.
Sold separately. Manufacturer warranty is not confirmed for this existing offer; no additional ClearVero warranty is included.
Available
Optional power addition
PLANET PoE Injector, ACTi PPOE-0107, up to 30W
$230.00 USD
Supply PoE power for one Z911 through your existing Ethernet connection.
Useful when: Your network connection has no suitable powered PoE switch or NVR port.
Not needed when: Your existing compatible PoE port already powers the camera.
Compatibility: PLANET-branded hardware supplied under ACTi reference PPOE-0107. IEEE 802.3af/at, up to 30W, for the Z911’s IEEE 802.3af connection. Install the injector indoors at 0–50°C and protect the outdoor camera connection.
Sold separately. One-year ACTi limited supplied-accessory coverage for eligible purchases; conditions apply.
Available
YOUR FIXED OUTDOOR VIEW
Choose your camera and the equipment you need
A compact fixed mini dome works best when the view and subject distance suit the entrance. Choose your camera quantity, then add only the recording, mounting and power equipment your installation is missing.
- One white 4MP Z911 mini dome
- Fixed 2.8mm F2.0 lens · 99° horizontal view
- Plan power, recording and mounting for your site
SKU Z911
$495.00 USD
Uses the camera quantity selected in the purchase area above.
- ClearVero product guidance
- 2-Year ACTi Limited Manufacturer Warranty
- 30-Day Return Request Period